Easy Way to Match a "One Way" Self-Striping Sock Yarn

This last week, I'd been making knee socks.  I posted a photo the first pair, in rose colors.  This was a so-so yarn quality but I bought it because the colors were so pretty.

Next, I tried some gorgeous high-end yarn, which came on a hank.  I weighed it, weighed my finished knee socks, rewound the good stuff on a cone, and started knitting a pair of knee socks.  I ran out of yarn before I finished the second sock. I was pretty grumbly about losing a game of "yarn chicken."  I can't get more - it was a gift and hand-dyed besides.

Not wanting to abandon the beautiful yarn as a UFO, I unraveled it and knitted ordinary short socks. I have a little left, and I'll think of something to do with the leftover sock yarn.  

Then I got into some 100-gram skeins of Sale Sock from Yarn Paradise.  I wasn't sure about quality, but I bought it because it was such pretty colors.  The yardage was good, and I got two pairs of socks out of two skeins - a pair of knee socks and a pair of regular socks.  I matched these by finding a place where the color changed, starting there, and then starting there on the second sock.  After making the knee socks first, it was easy to match the regular socks since I just started on the yarn where the knee socks ended.  I only had a very small amount of leftovers, some of it from where I started a ways into the yarn to make that second sock match.

I am really happy with this yarn, even though it was inexpensive (for sock yarn...sigh - it's not unusual to spend $20 or more for one pair's worth of really nice yarn).  This was soft and knitted beautifully in my antique CSM.  

But notice - this is a "one way" striping pattern.  It is not the same right-side up and upside-down.  It seems like most of the sock yarn I get is "one way."  I rewound my yarn twice, waxing it as I went, to eliminate any knots and tangles.  If I rewound one skein once and the other one twice, the patterns would not match - one pattern would be upside-down!

Once I visited my mom and she had a beautiful piece of plaid fabric and a pattern to make my little sister a 4-gore bias skirt.  She was puzzling over how to make that plaid match.   Mom showed me how the fabric was "one way" both vertically and horizontally.  It was a woven-in plaid, not a printed one, and after a whole lot of fiddling, we finally got a beautiful match by flipping the fabric upside-down and cutting out half of the pieces that way.  But I digress...  

Back to my current sock puzzle:  I still had two skeins of this blue print sock yarn, and they didn't start all that close to the same place in the one-way design.  I tried winding off yarn and looking for a spot that matched, but it was annoying - this is such a long repeat!  I wanted an easier, but accurate way to do it.

I came up with what I think is an efficient, easy way to make your socks match, and I want to share it.

Step One:  Wind cones or cakes of both skeins of yarn.  If you do cakes, leave the plastic centers in the yarn.  Not rewinding yarn for machine knitting is just asking for trouble anyway.  Always rewind your yarn!

Step Two:  Using the flatbed knitting machine and 60 needles, make enough rows to knit an entire repeat and a little more.  Remove the cone and the sample without cutting the yarn.  Do this with each skein.  Here's what I had at this point:

This was very fast and easy.  What you see in the picture is the beginning of the knit pieces at the top and the rest of the cone, unused, at the bottom.  

I put them on a table and lined them up, matching the knit design.  

Step Three:  Mark the place where I need to cut the yarn to get two matching cones.

Step Four:  Cut the yarn at that spot.  Why?  Well, you can't just unwind this from here - the top of the photo is the cast-on edge of the yarn.

Step 5:  Take a cone, push it back on the winder, and wind to unravel the stuff previously knitted up and wind it onto the cone, then do the same thing with the second cone.  This is also fast and easy.  Here's what I have:

This is two cones of yarn that should match very nicely.  The little piece is leftover, but I will probably need it for the second pair of socks.  By leaving it knitted, I'll be able to see how it will work in to where I run out, and using it plus my other skimpy little leftovers, I can probably create another matched pair. 

I am so happy with this approach!  Next time I work with unfamiliar self-striping yarn, I'll definitely do this again.  First of all, I can see at a glance how often it repeats, what it looks like, and whether the stripes are accurate and it can be matched.

I didn't knit my preview pieces on my antique CSM because mine has a closed yarn feeder, and I didn't want to cut the yarn more than necessary.  This was extremely quick to knit on the flatbed.

Cranked a Pair of Socks Today

 

I wanted some knee length socks while the weather is cool. My factory-made knee length socks have a seam on top of the toe that bugs me.

Today I modified my favorite circular sock machine pattern to make the ankle long and the cuff short, and I'm pretty happy with these.

Here are the details for those of you use CSMs to make socks. I used the 72-stitch pattern from The Happy Cranker with my 100+ year-old Legare. This has ribs up the top. I measured my leg and followed the ankle routine for 126 rounds (!) to make the calf and then made the cuff just 18 rounds. I had the heel spring on the whole time. With the heel spring for tighter stitches and the ribs, I get a warm sock that is dense and comfy and not too big even though it's a 72-stitch cylinder. I have an 8 wide shoe size and I have to have enough leg width to go around my not-thin calves.

This yarn is Print Sock from Ice Yarns (Yarn Paradise). This was such a catchy wool! It doesn't seem as soft as other 75% Superwash wool/25% nylon yarns. It took me a long time to rewind it and wax it, as I was constantly untangling it. Then I spent another long while trying to figure out the color repeats and match the stripes. They almost match, but they're slightly off, maybe 1-2 rows. I'm okay with that. On my next pair I plan to crank 25 rounds for the ankle and then take off the heel spring for the other 101 rounds of the leg. Then I'll put the heel spring back on for the top cuff. I really do not have skinny calves!

On my monitor, the color in the photo looks wrong. The sock is pink, lavender, rose, and a dark brownish purple. On my monitor it looks like it has gray and blue - nope, all pinks/purples.

Edit

Add Photos/Videos

Add to your post

This can't be combined with what you've already added to your post.

What's Going On With My New Facebook Group?

 I was advised by family and friends to do a Facebook group.  I'm really NOT quick to adopt social media strategies.  I have this ugly vision of myself strapped to a computer and forced to fool with social media all the time.

However, Facebook worked very well for online virtual seminars, and I simply put up some ground rules - stick to knitting and be nice.  I started a Facebook that is free and fairly wide-ranging in content:  Knitting With Diana Sullivan.   Join up and see!

We have about 2,600 people there now, and I am getting a huge kick out of what people are posting, gosh, especially the photos of what people are making.  A wonderful lady is helping me moderate.  

I've been posting free patterns and videos in this group to help a children's charity. The upstate New York knitters are making clothes for a huge number of Build A Bear bears.  The bears are being supplied through a counseling service to children in crisis.  You know how much kids like to dress up their toys!

The needs are ongoing and persistent, and there isn't really an end date for this project.  Of course we could use your help.

Want to learn to knit teddy bear clothes?  Or would you just like patterns that actually fit the Build A Bear bears?  These are specifically sized for the Build A Bear toys that are available for the charity.  They send me measurements and I even purchased a bear for a mannequin.  These bears are about 17 to 18 inches tall and they are CHUBBY.  The clothes look short and wide, but do fit Teddy beautifully.  

So far, I have put up the pattern and video for the top-down raglan, the beret hat, the Mary Jane slippers, and the dress.  The beret is a round, flat tam, and after putting up a video showing with and without ear holes, the group asked for both options, so that's how I did the pattern.

Come and join us!  This is a worthy cause, and it is so much fun to knit these small projects!

New Video - Seashell Shawl Techniques

 I posted a new video the other day about how to make the Seashell Shawl.

This is a really interesting stitch.  I've been working on the pattern the last few years, changing thing up to make it easier to do and to make it possible to knit it on all three gauge machines - bulky, mid-gauge, and standard gauge.  

I have tried this shawl in SO many yarns!  I never quite know how it will look in a particular yarn until I try a shell or two, and I especially loved it with two strands of thinner stuff and in self-striping yarns.  

I am not quite sure how many I have knitted, as I have given some away.  They take me a long afternoon (after some practice) but the standard gauge takes about twice as long.  More stitches, you know!  This is all short-rowing.

This pattern is available at www.dianaknits.com and at Etsy.  It's a digital download.  It's actually three separate patterns for the three gauges, and I've added lots of photos and diagrams.  There's also a big diagram you can use to track your own progress.  

Here's a little video "ad" I did to Etsy.  You can see some of the other versions of the shawl in this quick little video.